VOLUME 9, ISSUE 11 - International Journal of Advanced Research in Science, Engineering and Technology

Recent Issue November 2022

Volume 9, Issue 11, November 2022

1.	Static Stability of Coordinated Rotation Systems Based on an Electromagnetic Working Shaft Kazim Dadadjanov Doctor of philosophy (PhD), Senior Research Fellow, Department of Energy, Tashkent State Technical University, Tashkent, Uzbekistan and director of LLC UPTS "Uzneftgazaloqa" Tashkent, Uzbekistan. Abstract
2.	Improvement of Electromagnetic Liquid Converters with ring Channels Aminjon Odilovich Ataullayev, Muzaffar Karimtoshevich Sayidov PhD of the department "Electric power engineering" NSMTU Assistant of the department "Electric power engineering" NSMTU Abstract
3.	Obtaining of Potassium Sulfate from Flotation Potassium Chloride and Ammonium Sulfate Boboev Abror, Mirzakulov Kholtura, Zikirov Khusan PhD Student, Department of Chemical Technology of Inorganic Substances, Tashkent Institute of Chemical Technology, Tashkent, Uzbekistan Professor, Department of Chemical Technology of Inorganic Substances, Tashkent Institute of Chemical Technology, Tashkent, Uzbekistan PhD Student, Department of Chemical Technology of Inorganic Substances, Tashkent Institute of Chemical Technology, Tashkent, Uzbekistan Abstract
4.	Statistical analysis of power waste in 6-10 kV tension overhead electrical transmission lines Tovbоev Akram Nurmonovich, Nodirov G'ulom Yusupovich, Togaev Islom Bekpolat ogli Candidate of Technical Sciences Navoiy State of Mining and Technologies University. Uzbekistan. Teacher of the Department of "Natural Sciences" of the Samarkand State Institute of Architecture and Construction. Uzbekistan. Assistant of «Electrical power engineering» Department. Navoiy State of Mining and Technologies University. Uzbekistan. Abstract
5.	Highly elastic fabrics with polyester and cotton blends Xо'jayev R., Kadirova D.N Tashkent institute of textile and light industry, Uzbekistan Abstract
6.	Investigation of a Model of Multi-Engine Electric Drive Based on Electromagnetic Working Shaft Sarvar Sabitov Engineer of ABSOLUTE TECH LLC, Tashkent, Uzbekistan. Abstract
7.	Application of Water Saving Irrigation Technology in Cotton Cultivation Bakhtiyar Matyakubov, Dilmurod Nurov Doctor of Agriculture Sciences, Professor of National Research University "Tashkent institute of irrigation and agricultural mechanization engineers", Tashkent, Uzbekistan. Doctoral student (PhD) of the Bukhara Institute of Natural Resources Management at the NRU "TIIAME", Bukhara, Uzbekistan. Abstract
8.	Methodology for conduction and calculation of the results of an experimental study for condensation of vapors on vertical tubes with specially profiled ribs Lutfulla Eshkuvatov, Mirjalol Ruzinazarov Tashkent State Technical University named after Islam Karimov, Tashkent, Uzbekistan Abstract
9.	Gelatin coated PCL nanofibers for biomedical applications Rabab A. Mostafa, Ibrahim M. El-Sherbiny, Nabila S. Selim, Abdelsattar M. Sallam, Hoda A. Ashry Radiation Physics Department, National Centre For Radiation Research and Technology (NCRT), Egyptian Atomic Energy Authority (EAEA). Nanomedicine Lab, Center of Materials Sciences (CMS), Zewail City of Science and Technology, 6th of October, Giza 12578, Egypt. Radiation Physics Department, National Centre For Radiation Research and Technology (NCRT), Egyptian Atomic Energy Authority (EAEA). Physics Department, Faculty of Science, Ain Shams University, Cairo, Egypt. Radiation Physics Department, National Centre For Radiation Research and Technology (NCRT), Egyptian Atomic Energy Authority (EAEA). Abstract
10.	A new technology for leaching saline soils B.K. Saliev, R.R. Turakhanov Scientific Research Institute of irrigation and water problems, 11, massiv Karasu, Tashkent, 100187 Uzbekistan Independent researcher. Abstract
11.	Assessment of Natural External Influences on Pasture and Forages in the South Aral Sea Regions using Remote Sensing and Geoinformation Technologies Jaksibaev Rashid Nietalievich PhD student, "Tashkent institute of irrigation and agricultural mechanization engineers" National research university, Tashkent, Uzbekistan. Abstract
12.	Optimization of Deep Hole Machining with Centrifugal Rolling Fayzimatov Shukhrat Numanovich, Yakupov Artur Mansurovich, Khusanov Yunusali Yuldashaliyevich P.G. Doctor of technical sciences, professor Department of "Mechanical engineering and automation", Fergana Polytechnic Institute, Fergana, Uzbekistan Candidate of technical sciences, professor Department of "Mechanical engineering", Andijan Machine-Building Institute, Andijan, Uzbekistan P.G. Doctor of technical sciences, professor Department of "Mechanical engineering and automation", Fergana Polytechnic Institute, Fergana, Uzbekistan Abstract
13.	Investigation of the Process of Obtaining Ammophos from a Solution of Enrichment of Phosphorites of Central Kyzylkums with Extraction Phosphoric Acid Umarov Shavkat, Mirzakulov Kholtura, Arifdjanova Kamola, Nuriddinov Uktam DSc Student, Department of Chemical Technology of Inorganic Substances, Tashkent Institute of Chemical Technology, Tashkent, Uzbekistan Professor, Department of Chemical Technology of Inorganic Substances, Tashkent Institute of Chemical Technology, Tashkent, Uzbekistan DSc, Department of Chemical Technology of Inorganic Substances, Tashkent Institute of Chemical Technology, Tashkent, Uzbekistan Teacher, Department of Chemistry and its Teaching Methodology, Jizzakh State Pedagogical University, Jizzakh, Uzbekistan Abstract
14.	Design and Fabrication of Gas Kiln from Local Raw Materials in South Eastern Nigeria Osonwa Nobert Okechinyere , Odewale Isiaka Olajide, Arihilam E.C, Mbabuike Ikenna U, Izuegbu Lilian C, Ekwueme Ekenna Department of Ceramic and Glass Technology, Akanu Ibiam Federal Polytechnic Unwana, Afikpo Ebonyi State Nigeria Department of Ceramic and Glass Technology, Akanu Ibiam Federal Polytechnic Unwana, Afikpo Ebonyi State Nigeria Department of Electrical and Electronics Engineering, Akanu Ibiam Federal Polytechnic Unwana, Afikpo Ebonyi State Nigeria Department of Mechatronics Engineering, Akanu Ibiam Federal Polytechnic Unwana, Afikpo Ebonyi State Nigeria. Department of Metallurgical Engineering, Akanu Ibiam Federal Polytechnic Unwana, Afikpo Ebonyi State Nigeria. Department of Building Technology, Akanu Ibiam Federal Polytechnic Unwana, Afikpo Ebonyi State Nigeria. Abstract
15.	Review of Fault Diagnosis of Cylindrical Bearing with Defects Samruddhi Patel, Dr. U. V. Shah, Dr. B. C. Khatri, Dr. U. A. Patel Research Scholar, Gujarat Technological University, Ahmedabad, Assistant Professor, Government Engineering College, Modasa. Gujarat. India Professor, Government Engineering College, Modasa, Gujarat. India Associate Professor, Government Engineering College, Modasa, Gujarat. India Assistant Professor, L. D. College of Engineering, Ahmedabad, Gujarat. India Abstract
16.	Effect of Steel Industry effluent on surface water and ground water quality Gunja, Beena Sharma P.G. Student, Department of Biotechnology, Bhilai Mahila Mahavidyalaya, Durg, Chhattisgarh, India Scientist 'C' Chhattisgarh Council of Science & Technology, Raipur, Chhattisgarh, India Abstract
17.	Vehicle Theft Control System using Fingerprint Sensor and IOT Devices Diksha Malhotra, Manjot Kaur Bhatia, Aprajita Shahi, Jai Narula Student, Jagan Institute of Management Studies, Sector-5, 3-Institutional area, Rohini, Delhi, India Professor, Jagan Institute of Management Studies, Sector-5, 3-Institutional area, Rohini, Delhi, India Student, Jagan Institute of Management Studies, Sector-5, 3-Institutional area, Rohini, Delhi, India Student, Jagan Institute of Management Studies, Sector-5, 3-Institutional area, Rohini Delhi, India Abstract
18.	Extraction of Text from Digital Images in Multiple Languages using Pytesseract Dr.G.Lakshmi, V.Pravallika, R.Rattaiah, M.Sriramchandra, M.Supritha, T.Lohith Assistant Professor, Department of Information Technology, Prasad V. Potluri Siddhartha Institute of Technology, Vijayawada, Andhra Pradesh, India B.Tech Student, Department of Information Technology, Prasad V. Potluri Siddhartha Institute of Technology, Vijayawada, Andhra Pradesh, India B.Tech Student, Department of Information Technology, Prasad V. Potluri Siddhartha Institute of Technology, Vijayawada, Andhra Pradesh, India B.Tech Student, Department of Information Technology, Prasad V. Potluri Siddhartha Institute of Technology, Vijayawada, Andhra Pradesh, India B.Tech Student, Department of Information Technology, Prasad V. Potluri Siddhartha Institute of Technology, Vijayawada, Andhra Pradesh, India B.Tech Student, Department of Information Technology, Prasad V. Potluri Siddhartha Institute of Technology, Vijayawada, Andhra Pradesh, India Abstract
19.	Artificial Intelligence in Transportation Systems – An Overview Papiya Bala, Amarpreet Kaur, Ruchira Shinde Lecturer, ME. Environmental Engineering, Department of Civil Engineering, Agnel Polytechnic, Vashi, Navi Mumbai, India Lecturer, M Tech Construction Management, Department of Civil Engineering, Agnel Polytechnic, Vashi, Navi Mumbai, India Lecturer, BE Civil, Department of Civil Engineering, Agnel Polytechnic, Vashi, Navi Mumbai, India Abstract
20.	Obtaining High-Quality Monoammonium Phosphate from the Enrichment Solutions of Washed Burnt Phosconcentrate of Central Kyzylkums Umarov Shavkat, Mirzakulov Kholtura, Arifdjanova Kamola, Kodirov Sherzod DSc Student, Department of Chemical Technology of Inorganic Substances, Tashkent Institute of Chemical Technology, Tashkent, Uzbekistan Professor, Department of Chemical Technology of Inorganic Substances, Tashkent Institute of Chemical Technology, Tashkent, Uzbekistan DSc, Department of Chemical Technology of Inorganic Substances, Tashkent Institute of Chemical Technology, Tashkent, Uzbekistan Teacher, Department of Chemical Technology, Jizzakh Polytechnic Institute, Jizzakh, Uzbekistan Abstract
21.	CFRP Milling Machining – Using Solid Carbide Endmill: A Research Review Prof. P. R. Parekh, Prof. P. D. Patel, Prof. B. C. Khatri , Prof. U. V. Shah Research Scholar, Gujarat Technological University Automobile Engineering Department,LDCE, AHMEDABAD Mechanical Engineering Department, Government Engineering College, Modasa Mechanical Engineering Department, Government Engineering College, Modasa Abstract
22.	GM of AM and HM: A Measure of Central Tendency of Sex Ratio Dhritikesh Chakrabarty Independent Researcher, Ex Associate Professor, Department of Statistics, Handique Girls' College, Guwahati – 781001, Assam, India Abstract
23.	Study of the oxidation process in electric arc welding S.S. Khudoyorov, L.V. Galperin, N.S. Dunyashin, Z.D. Ermatov, N.T. Rakhmatullayeva, M.M. Abdurakhmonov Associate Professor, Doctor of Philosophy in Technical Sciences (PhD), Department of Technological machines and equipment, Tashkent State Technical University named after Islam Karimov, Tashkent, Uzbekistan Researcher, Doctor of Philosophy in Technical Sciences (PhD), Department of Technological machines and equipment, Tashkent State Technical University named after Islam Karimov, Tashkent, Uzbekistan Head of the Department, Doctor of Technical Sciences, Professor, Department of Technological machines and equipment, Tashkent State Technical University named after Islam Karimov, Tashkent, Uzbekistan Professor, Doctor of Technical Sciences, Department of Technological machines and equipment, Tashkent State Technical University named after Islam Karimov, Tashkent, Uzbekistan Senior lector of the department of "Technological machines and equipment" of Tashkent State Technical University named Islam Karimov, Tashkent, Uzbekistan. Assistant of the department of "Technological machines and equipment" of Tashkent State Technical University named Islam Karimov, Tashkent, Uzbekistan. Abstract
24.	Calculation of the optimal parameters of the heat transfer surface of the condensing heat exchanger in boiler units Anarbaev AI, Abdullabekov Yu.U., Hasanov Z., Isaxodjaev X.S Associated Professor, Dean of Thermodynamics and heat technics, State Technical University, Tashkent, Uzbekistan Abstract
25.	Concept "TEMPORAL" And Lexical Semantic Language Islamova Mukhabbat Mikhtibaevna Senior lecturer, University named of Tashenova (Kazakhstan) Abstract
26.	Adsorption Characteristics of Intercalated Aluminosilicates with Respect to Dyes Sharipova A.Sh., Seitnazarova O.M., Ibodullaeva S.M., Abdikamalova A.B. Associate professor, Karakalpak State University, Nukus, Karakalpakstan Associate professor, Karakalpak State University, Nukus, Karakalpakstan Doctoral student, Institute of General and Inorganic Chemistry, Tashkent, Uzbekistan Leading researcher, Institute of General and Inorganic Chemistry, Tashkent, Uzbekistan Abstract
27.	The Main Areas of Application of Water-Soluble Polymers of Acrylamide to Solve the Problem of Environmental Protection and Structure Formation in the Soil Abdurahimov D.Kh., Ismailov B.M., Tanatarov O.R., Adikamalova A.B., Kuldasheva Sh.A., Agzamova F.N. Junior researcher, Institute of General and Inorganic Chemistry, Tashkent, Uzbekistan Doctoral student, Karakalpak Scientific Research Institute of the Karakalpak Branch of the Academy of Sciences of the Republic of Uzbekistan Doctoral student, Institute of General and Inorganic Chemistry, Tashkent, Uzbekistan Leading researcher, Institute of General and Inorganic Chemistry, Tashkent, Uzbekistan Chief researcher, Institute of General and Inorganic Chemistry, Tashkent, Uzbekistan Junior researcher, Institute of General and Inorganic Chemistry, Tashkent, Uzbekistan Abstract
28.	Protected Natural Areas and Their Significance in Improving the Ecosystem of Our Republic Khakimov Uktam, Adilov Sobit, Mamanazarov Jaloliddin, Babaeva Zarifakhon, Buzanov Yigitali Dotsent, Senior researcher, Navoi Branch of the Academy of Sciences of the Republic of Uzbekistan, Navoi, Uzbekistan Junior researcher, Navoi Branch of the Academy of Sciences of the Republic of Uzbekistan, Navoi, Uzbekistan Director, "Central Kyzylkum" National Nature Park, Navoi, Uzbekitan Researcher, "Markaziy Kyzylkum" National Nature Park, Navoi, Uzbekitan Researcher, "Markaziy Kyzylkum" National Nature Park, Navoi, Uzbekitan Abstract
29.	The Impact of the Use of Natural Agronomical Ores in the Vegetation Period of the Cotton Sh.I.Kodirova, G.Yu.Shoimova, M.B.Ravshanov PhD, Department of the Navoi branch of the Academy of Sciences of the Republic of Uzbekistan, Navоi, Uzbekistan Master's student, Navoi State Pedagogical Institute, Navoi, Uzbekistan Master's student, Navoi State Pedagogical Institute, Navoi, Uzbekistan Abstract
30.	Study of the Effect of Various Factors on the Process of Synthesis of High-Molecular-Weight Hydrocarbons from Synthesis Gas Quyboqarov Oybek, Fayzullaev Normurod, Rakhmatov Khudoyor Senior Lecturer, Department of Oil and Gas Processing Technology, Karshi Institute of Engineering and Economics, Republic of Uzbekistan, Karshi Doctor of Chemical Sciences, Professor of Samarkand State University, Republic of Uzbekistan Samarkand Candidate of Chemical Sciences, Associate Professor of the Department "Technology of Oil and Gas Processing" of Karshi Institute of Engineering and Economics, Republic of Uzbekistan, Karshi Abstract
31.	Investigation of the Influence of Various Factors on the Process of Synthesis of High Molecular Hydrocarbons from Synthesis Gas Kuybokarov Oybek Ergashovich , Fayzullaev Normurod Ibodullaevich, Rahmatov Kh. B., Senior Lecturer, Karshi Engineering and Economic Institute, Republic of Uzbekistan, city of Karshi Doctor of Chemical Sciences, Professor Samarkand State University,Republic of Uzbekistan city of Samarkand Candidate of Chemical Sciences, Associate Professor.Karshi Engineering and Economic Institute, Karshi, Kashkadarya region, Uzbekistan Abstract
32.	System of Indicators for Evaluating the Efficiency of Municipal Machines Khankelov T.K., Mukhamedova N.B., Komilov S.I., Mirxoliqov S.M. Tashkent State Transport University Abstract
33.	The Effect of Oxygen Components on the Deposit Forming Properties of Auto Gasoline Components Suyarov M.T., Yakubov Y.Yu., Makhmudov M.J 1st grade intern (junior specialist), "Uzbekistan GTL" LLC, Tashkent, Uzbekistan Doctor of Chemical Sciences Institute of General and Inorganic Chemistry, Republic Uzbekistan, Tashkent, Uzbekistan Doctor of Chemical Sciences, professor Bukhara Institute of Engineering and Technology, Bukhara, Uzbekistan Abstract

Paper Submission	:	25^th Dec 2024
Author Notification	:	within 3 days
Journal Publication	:	30^th Dec 2024

Recent News

Call for Papers

Download

Special Issue

Archives

Recent Issue November 2022

Volume 9, Issue 11, November 2022

Static Stability of Coordinated Rotation Systems Based on an Electromagnetic Working Shaft

Kazim Dadadjanov

Doctor of philosophy (PhD), Senior Research Fellow, Department of Energy, Tashkent State Technical University,

Tashkent, Uzbekistan and director of LLC UPTS "Uzneftgazaloqa" Tashkent, Uzbekistan.

Improvement of Electromagnetic Liquid Converters with ring Channels

Aminjon Odilovich Ataullayev, Muzaffar Karimtoshevich Sayidov

PhD of the department "Electric power engineering" NSMTU

Assistant of the department "Electric power engineering" NSMTU

Obtaining of Potassium Sulfate from Flotation Potassium Chloride and Ammonium Sulfate

Boboev Abror, Mirzakulov Kholtura, Zikirov Khusan

PhD Student, Department of Chemical Technology of Inorganic Substances, Tashkent Institute of Chemical Technology, Tashkent, Uzbekistan

Professor, Department of Chemical Technology of Inorganic Substances, Tashkent Institute of Chemical Technology, Tashkent, Uzbekistan

PhD Student, Department of Chemical Technology of Inorganic Substances, Tashkent Institute of Chemical Technology, Tashkent, Uzbekistan

Statistical analysis of power waste in 6-10 kV tension overhead electrical transmission lines

Tovbоev Akram Nurmonovich, Nodirov G'ulom Yusupovich, Togaev Islom Bekpolat ogli

Candidate of Technical Sciences Navoiy State of Mining and Technologies University. Uzbekistan.

Teacher of the Department of "Natural Sciences" of the Samarkand State Institute of Architecture and Construction. Uzbekistan.

Assistant of «Electrical power engineering» Department. Navoiy State of Mining and Technologies University. Uzbekistan.

Highly elastic fabrics with polyester and cotton blends

Xо'jayev R., Kadirova D.N

Tashkent institute of textile and light industry, Uzbekistan

Investigation of a Model of Multi-Engine Electric Drive Based on Electromagnetic Working Shaft

Sarvar Sabitov

Engineer of ABSOLUTE TECH LLC, Tashkent, Uzbekistan.

Application of Water Saving Irrigation Technology in Cotton Cultivation

Bakhtiyar Matyakubov, Dilmurod Nurov

Doctor of Agriculture Sciences, Professor of National Research University "Tashkent institute of irrigation and agricultural mechanization engineers", Tashkent, Uzbekistan.

Doctoral student (PhD) of the Bukhara Institute of Natural Resources Management at the NRU "TIIAME", Bukhara, Uzbekistan.

Methodology for conduction and calculation of the results of an experimental study for condensation of vapors on vertical tubes with specially profiled ribs

Lutfulla Eshkuvatov, Mirjalol Ruzinazarov

Tashkent State Technical University named after Islam Karimov, Tashkent, Uzbekistan

Gelatin coated PCL nanofibers for biomedical applications

Rabab A. Mostafa, Ibrahim M. El-Sherbiny, Nabila S. Selim, Abdelsattar M. Sallam, Hoda A. Ashry

Radiation Physics Department, National Centre For Radiation Research and Technology (NCRT), Egyptian Atomic Energy Authority (EAEA).

Nanomedicine Lab, Center of Materials Sciences (CMS), Zewail City of Science and Technology, 6th of October, Giza 12578, Egypt.

Radiation Physics Department, National Centre For Radiation Research and Technology (NCRT), Egyptian Atomic Energy Authority (EAEA).

Physics Department, Faculty of Science, Ain Shams University, Cairo, Egypt.

Radiation Physics Department, National Centre For Radiation Research and Technology (NCRT), Egyptian Atomic Energy Authority (EAEA).

A new technology for leaching saline soils

B.K. Saliev, R.R. Turakhanov

Scientific Research Institute of irrigation and water problems, 11, massiv Karasu, Tashkent, 100187 Uzbekistan

Independent researcher.

Assessment of Natural External Influences on Pasture and Forages in the South Aral Sea Regions using Remote Sensing and Geoinformation Technologies

Jaksibaev Rashid Nietalievich

PhD student, "Tashkent institute of irrigation and agricultural mechanization engineers" National research university, Tashkent, Uzbekistan.

Optimization of Deep Hole Machining with Centrifugal Rolling

Fayzimatov Shukhrat Numanovich, Yakupov Artur Mansurovich, Khusanov Yunusali Yuldashaliyevich

P.G. Doctor of technical sciences, professor Department of "Mechanical engineering and automation", Fergana Polytechnic Institute, Fergana, Uzbekistan

Candidate of technical sciences, professor Department of "Mechanical engineering", Andijan Machine-Building Institute, Andijan, Uzbekistan

P.G. Doctor of technical sciences, professor Department of "Mechanical engineering and automation", Fergana Polytechnic Institute, Fergana, Uzbekistan

Investigation of the Process of Obtaining Ammophos from a Solution of Enrichment of Phosphorites of Central Kyzylkums with Extraction Phosphoric Acid

Umarov Shavkat, Mirzakulov Kholtura, Arifdjanova Kamola, Nuriddinov Uktam

DSc Student, Department of Chemical Technology of Inorganic Substances, Tashkent Institute of Chemical Technology, Tashkent, Uzbekistan

Professor, Department of Chemical Technology of Inorganic Substances, Tashkent Institute of Chemical Technology, Tashkent, Uzbekistan

DSc, Department of Chemical Technology of Inorganic Substances, Tashkent Institute of Chemical Technology, Tashkent, Uzbekistan

Teacher, Department of Chemistry and its Teaching Methodology, Jizzakh State Pedagogical University, Jizzakh, Uzbekistan

Design and Fabrication of Gas Kiln from Local Raw Materials in South Eastern Nigeria

Osonwa Nobert Okechinyere , Odewale Isiaka Olajide, Arihilam E.C, Mbabuike Ikenna U, Izuegbu Lilian C, Ekwueme Ekenna

Department of Ceramic and Glass Technology, Akanu Ibiam Federal Polytechnic Unwana, Afikpo Ebonyi State Nigeria

Department of Ceramic and Glass Technology, Akanu Ibiam Federal Polytechnic Unwana, Afikpo Ebonyi State Nigeria

Department of Electrical and Electronics Engineering, Akanu Ibiam Federal Polytechnic Unwana, Afikpo Ebonyi State Nigeria

Department of Mechatronics Engineering, Akanu Ibiam Federal Polytechnic Unwana, Afikpo Ebonyi State Nigeria.

Department of Metallurgical Engineering, Akanu Ibiam Federal Polytechnic Unwana, Afikpo Ebonyi State Nigeria.

Department of Building Technology, Akanu Ibiam Federal Polytechnic Unwana, Afikpo Ebonyi State Nigeria.

Review of Fault Diagnosis of Cylindrical Bearing with Defects

Samruddhi Patel, Dr. U. V. Shah, Dr. B. C. Khatri, Dr. U. A. Patel

Research Scholar, Gujarat Technological University, Ahmedabad, Assistant Professor, Government Engineering College, Modasa. Gujarat. India

Professor, Government Engineering College, Modasa, Gujarat. India

Associate Professor, Government Engineering College, Modasa, Gujarat. India

Assistant Professor, L. D. College of Engineering, Ahmedabad, Gujarat. India

Effect of Steel Industry effluent on surface water and ground water quality

Gunja, Beena Sharma

P.G. Student, Department of Biotechnology, Bhilai Mahila Mahavidyalaya, Durg, Chhattisgarh, India